NON-SLIP SAFETY COATING
DURABAK™ is a tough, single-pack, totally flexible, slip-resistant, waterproof protective polyurethane coating with self-contained recycled rubber granules for an attractive tough-textured finish. When exposed to atmospheric moisture, DURABAK™ undergoes a chemical curing process which changes it from a liquid to a tough polyurethane membrane. It has excellent abrasion and chemical resistance. It is also available in a smooth version without the rubber granules.
Both DURABAK™ (aromatic version) and DURABAK 18™ (aliphatic version) may be used for indoor and outdoor applications. However, as DURABAK™ may experience some degree of fade in outdoor applications, DURABAK 18™ is recommended for maximum UV protection under these conditions.
For enhanced UV protection, DURABAK™ may be topcoated with COTE-L'S rejuvenator. Call COTE-L Industries for more information.
DURABAK™ will chemically bond to most clean and dry surfaces. These include, but are not limited to, concrete, wood, fiberglass, metal, rubber and sound-painted materials. Some metal and extremely porous surfaces may need to be primed. DURABAK™ can be applied by roller, brush or spray. DURABAK™ can give a relatively smooth or rough surface, depending on application technique.
DURABAK™ has many applications for commercial, military and civilian use. DURABAK™ protects surfaces from foul weather elements and harsh chemicals, while creating a non-slip surface on:
pedestrian walkways/truck beds/ramps and loading docks/bridges/metal and wooden steps/catwalks/ship decks/marine applications/pleasure boats/storage tanks/floors/handicap ramps/pools and spas/sealing rusty pipes/playgrounds/freight elevators/tool handles/roofing/vehicle undercoating/curb ramps/parking lots
One-Part No mixing of components
Totally Flexible Never chips, flakes or peels
Repairable Bonds to itself
Protection Water proof. Resistant to acid, chemicals, UV exposure, salt water
Fast Drying Very short intercoat time;
Foot traffic in 6 to 12 hours
Ecconomical Lasts for years; no need to remove old DURABAK when recoating
A complete Material Safety Data Sheet is available on request.
– Weight per gallon, pounds 10
– Viscosity, Kreb units 67-72
– Percent solids by weight 66%
– Application temperature range 32 F to 95 F
– Application thickness, 2 coats dry 29-39mils
– Flexibility total flexibility
– Resilience resilient in dry state
– Abrasion resistance
Tabor wheel, 1000 gr load, 1000 cycles 30.5
– Fire resistance
Flame spread ASTM E-162: 01
Smoke generation ASTM E662: 06
– Salt water resistance 100%
– Freeze-thaw resistance –60 F to +254 F
– Pot life 3 hours
– Shelf life min. 1 year
– Flash time 1˝ to 3 hours
– Walk time 6 to 12 hours
– Time between coats ± 1 hour
– Full cure ± 4 days
– VOC 2.08 lbs/gal
– Solids 75.8%
– DOT Hazmat Info. Paint, 3, UN1263, PG III
DURABAK™ comes in standard and custom colors, including Black, Dark Grey, Light Grey, Brick Red, Safety Red, Dark Blue, Medium Blue, Forest Green, Avocado Green, Safety Yellow, Safety Orange, White, Tan, Cream and Clear (without pigment or rubber granules). All colors also available in smooth version (without granules). Color matching on volume orders.
Cote-L Home Page
DURABAK™ Application Tips
Photos of DURABAK™ In Use
"Road and Bridges" Article